Disassembly of Rack Assembly.

TM 9-2320-211-20-3-2

NOTE

If carriage bolts turn when taking off nuts,

wood is unserviceable. Split wood away from

bolt. Using 1/2-inch open end wrench, hold

bolt.

FRAME 1

Using screwdriver and 1/2-inch wrench, unscrew and take out two screws (1).

Take off two washers (2), clamps (3), and nuts (4) on each end.

2. Using 1/2-inch wrench, unscrew and take off two nuts (5) from each end

bow pocket assembly (6).

3. Using 1/2-inch wrench, unscrew and take off four nuts (7) from each of

center four bow pocket assemblies (8).

4. Take off boards (9).

5. Using mallet, hammer 20 square neck screws (10) out of boards (9).

END OF TASK