CAB TUNNEL REMOVAL AND REPLACEMENT.

TM 9-2320-211-20-3-2

17-5. CAB TUNNEL REMOVAL AND REPLACEMENT.

TOOLS: 7/16-inch wrench

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Removal.

FRAME

Lift up companion seat (1).

Using 7/16-inch wrench, unscrew and take out 12 screws (2) with lockwashers

(3) on front tunnel (4).

NOTE

If front tunnel has a boot put in, shift knob may have to

be taken out to lift tunnel off over shift lever.

3. Lift up and slide off front tunnel (4).

4. Using 7/16-inch wrench, unscrew and take out 11 screws (5) with lockwashers

(6) on toe board (7). Take off toe board.

5. Using 7/16-inch wrench, unscrew and take out six screws (8) with lockwashers

(9). Lift up and slide off rear tunnel (10).

END OF TASK