Cleaning. - TM-9-2320-211-20-3-20183

TM 9-2320-211-20-3-2

Cleaning.

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

NOTE

Clean all parts before inspection, after repair,

and before assembly.

(1) Clean inner and outer surfaces of metallic parts and all areas that might

get oil or grease with dry cleaning solvent.

(2) Remove sludge and gum deposits with a stiff brush.

(3) Steam cleaning may be used to take off grease and dirt after dry

cleaning solvent has been used.

(4) Dry with clean rags.

(5) Rust must be taken off using a wire brush.

(6) Refer to Part 1, para 1-3 for more cleaning steps.