FRAME 3 - TM-9-2320-211-20-3-20102

TM 9-2320-211-20-3-2

FRAME 3

Put end (1) of retaining ring (2) into rim groove (3) of rim (4). Check that

the end is caught in the rim groove.

Using locking ring tire iron, put it in slot (5) in retaining ring (2). Pry iron

toward out side of rim (4) forcing retaining ring into rim groove (3).

Using foot, walk retaining ring (2) into rim groove (3) until it is seated fully

all the way around rim (4).

Using mallet, hammer all the way around on retaining ring (2) to make sure

that it is fully caught in rim groove (3).

WARNING

Be careful when inflating tire. Remounted tires should

always be inflated in a safety cage. If a safety cage is

not available, turn tire and rim over with outer hub-side

down.

5. Put air in tire. Refer to TM 9-2320-211-10. Screw on valve cap (6) after inflat-

ing tire.

NOTE

Follow-on Maintenance Action Required:

Replace tire on truck. Refer to TM 9-2320-211-10.

END OF TASK

13-80