FRONT AND REAR HUB AND BRAKE DRUM ASSEMBLY REPAIR.

TM 9-2320-211-20-3-2

13-5. FRONT AND REAR HUB AND BRAKE DRUM ASSEMBLY REPAIR.

Arbor press

TOOLS : 11/16-inch wrench

Ballpeen hammer

Brass Hammer

Brass drift

Wood block, 4 X 4 X 18

Stiff brush

inches (2)

SUPPLIES : None

PERSONNEL : Two

EQUIPMENT CONDITION : Truck parked, engine off, handbrake set.

a. Preliminary Procedure. Remove hub and brake drum assembly. For front hub

and brake drum assembly, refer to para 13-4. For rear hub and brake drum assembly,

b. Front Hub and Brake Drum.

(1) Disassembly.

FRAME 1

Soldiers 1.

Put drum (1) on top of two wood blocks (2) as shown.

A and B

Using 11/16-inch wrench, unscrew and take off 10 nuts (3) and

washers (4). Take off inspection cover (5).

Using brass hammer, tap hub assembly (6) out of drum (1).

GO TO FRAME 2