Air tube junction tee assembly. - TM-9-2320-211-20-3-10861

TM 9-2320-211-20-3-1

(b) Air tube junction tee assembly.

CAUTION

Fittings are made of soft brass and can be

stripped easily if tightened too much. Tighten

fittings just enough to stop air from leaking.

NOTE

The air tube junction tee assembly on the rear

air service crossover tube at rear of truck

chassis on truck M52A2 is used for this typical

task.

FRAME 1

Screw three tube nuts (1) onto tee fiting (2).

Using 9/16-inch open end wrench, hold tee fitting (2).

Using 5/8-inch combination box and open end wrench, tighten three tube

nuts (l).

NOTE

Follow-on Maintenance Action Required:

Start engine and let it run until air pressure gage

reads between 65 and 120 psi. Refer to

TM 9-2320-211-10.

Stop engine. Refer to TM 9-2320-211-10.

Do air system leak test. Refer to para 1-5.

END OF TASK

12-129