Removal. - TM-9-2320-211-20-3-10793

TM 9-2320-211-20-3-1

Removal.

NOTE

Put container under hydraulic lines and fittings

to catch draining hydraulic fluid. Cap all open

hoses, lines and fittings to keep dirt from getting

into hydraulic systems.

Tag all lines so they will be put back in the same

place.

Some hydraulic lines and hoses may have plastic

ties in place of clamps. If so, cut and take off

all plastic ties.

(1) Hydraulic lines and clamps.

NOTE

Hydraulic line on the forward-rear axle is used

for this typical procedure.

FRAME 1

Using 1/2-inch wrench, hold multiple connector (1). Using 7/16-inch combin-

ation box and open end wrench, unscrew and take out tube nut (2).

GO TO FRAME 2