|
|
TM 9-2320-211-20-3-1
Cleaning.
b.
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame. Keep a fire extinguisher nearby when sol-
vent is used. Use only in well-ventilated places. Fail-
ure to do this may result in injury to personnel and dam-
age to equipment.
1.
Soak relief valve (1) in solvent.
2.
Using wire brush, brush all dirt from relief valve (1).
3.
Clean passage (2) and make sure valve cap (3) moves freely.
WARNING
Eye shields must be worn when using compressed air.
Eye injury can occur if eye shields are not used,
4. Dry with compressed air and put on a coat of lubricating oil.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |