Replacement of Front Composite Light Assembly.

TM 9-2320-211-20-3-1

Push three electrical leads (1) through center hole in bracket (2).

Aline holes in light body (3) with holes in bracket (2).

Using 9/16-inch wrench, screw in and tighten two screws (4) with washers

(5).

4. Push three electrical leads (1) through hole in fender (6).

5. Working under fender, push together three connectors (7) as tagged. Take

off tags.

6. Put cover plate (8) and brush guard bracket (9) in place. Using 1/2-inch

wrenches, screw on and tighten four screws and nuts (10).

END OF TASK