AUXILIARY POWER SOCKET ASSEMBLY REMOVAL AND REPLACEMENT.

TM 9-2320-211-20-3-1

7-20. AUXILIARY POWER SOCKET ASSEMBLY REMOVAL AND REPLACEMENT.

TOOLS: 7/8-inch wrench

Flat-tip screwdriver

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedure. Disconnect battery ground cable. Refer to para 7-44.

b. Removal.

If connector (1) is connected to receptacle (2), using 7/8-inch wrench, unscrew

and take out connector (1).

2. Pull cable (3) out of clip (4).

3. Using screwdriver, loosen screw (5) and take off power socket assembly (6)

and cable (3).

4. Using screwdriver, unscrew and take out screw (7).

5. Take cable (3) from power socket assembly (6).

END OF TASK