|
|
TM 9-2320-211-20-3-1
Draining.
b.
FRAME 1
Do not open filler cap (1) if engine is hot. Pressure will
blow out scalding fluid and vapor. Personnel can be badly
burned.
1. Press down and turn filler cap (1) all the way to the left and lift it off.
2. Put containers under engine block drain cock (2) and radiator drain cock (3).
Using pliers, turn two drain cocks to right and let coolant drain into two
containers.
3. After all coolant has drained out, turn two drain cocks (2 and 3) to left to
close.
4. Empty coolant into approved disposal area.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |