OIL COOLER WATER INLET TUBE REMOVAL AND REPLACEMENT.

TM 9-2320-211-20-3-1

6-10. OIL COOLER WATER INLET TUBE REMOVAL AND REPLACEMENT.

TOOLS: Flat-tip screw driver

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) Open hood. Refer to TM 9-2320-211-10.

(2) Drain cooling system. Refer to para 6-13.

Removal.

FRAME 1

1. Using flat-tip

screwdriver, unscrew two clamp screws (1).

2. Using flat-tip

screwdriver, unscrew two clamp screws (2).

3. Pull tube (3)

with hoses (4 and 5) off engine (6).

4. Take off hoses

(4 and 5) from tube (3).

END OF TASK