Section III. THERMOSTAT

TM 9-2320-211-20-3-1

THERMOSTAT

Section III.

6-8. FLOW CONTROL THERMOSTAT REMOVAL AND REPLACEMENT.

Flat-tip screwdriver

TOOLS:

9/16-inch wrench

Pliers

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

SUPPLIES:

Thermostat seal

Gasket

One

PERSONNEL:

Truck parked, engine off, handbrake set.

EQUIPMENT

CONDITION:

Preliminary Procedure. Drain cooling system. Refer to para 6-13.

Removal .

FRAME 1

Using screwdriver, loosen screw (l) on rear clamp (2) and take hose (3) off

housing (4).

Using 9/16-inchwrench, unscrew and take out two screws (5) with washers (6)

3. Using screwdriver and pliers, loosen two screws (7) on two clamps (8).

GO TO FRAME 2