Inspection and Repair. - TM-9-2320-211-20-3-10281

TM 9-2320-211-20-3-1

Inspection and Repair.

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

(1) Clean mud and dirt from all parts with water and wire brush.

(2) Take off grease with solvent.

(3) Check all parts for wear or damage. Tell direct support maintenance if

repairs are needed.

d. Replacement.

Slide exhaust pipe (1) into place through hole in fender (2).

2. Join exhaust pipe (1) to turbocharger (3) with coupling (4).

3. Using 1/2-inch wrench, tighten screw (5).

GO TO FRAME 2