 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 Repair.
c.
WARNING
Dry cleaning solvent is flammable. Do not use
near an open flame. Keep a fire extinguisher
nearby when solvent is used. Use only in well-
ventilated places. Failure to do this may result
in injury to personnel and damage to equipment.
(1) Wash all parts in solvent and let parts dry.
(2) Check that all parts have no cracks, stripped threads or other damage.
(3) Throw away all damaged parts and get new ones in their place.
Replacement.
d.
FRAME 1
Put bracket (1) in place under floorboard and aline holes. Put in two screws
1.
(2). Using l/2-inch wrenches, screw on and tighten two nuts (3).
Put throttle linkage bracket (4) in place in bracket (1) and aline holes. Put
2.
in pin (5).
Put pedal and bracket assembly (6) in place as shown, with pedal rod (7)
3.
through hole in floorboard. Aline holes for screws (8).
Put in two screws (8). Using 1/2-inch wrench or phillips screwdriver, hold
4.
screws. Using l/2-inch socket wrench, screw on and tighten two nuts (9).
Put pedal rod (7) in hole in throttle linkage bracket (4).
5.
GO
TO FRAME 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals