MANIFOLD HEATER WIRING HARNESS REMOVAL AND REPLACEMENT.

TM 9-2320-211-20-3-1

4-31. MANIFOLD HEATER WIRING HARNESS REMOVAL AND REPLACEMENT.

TOOLS: Pliers

l/2-inch wrench

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) Open hood. Refer to TM 9-2320-211-10.

(2) Disconnect battery ground cable. Refer to para 7-44.

b. Removal.

FRAME 1

Pull plug (1) out of connector (2).

2. Using l/2-inch wrench, unscrew and take out screw (3). Take off ground

cable (4).

3. Using pliers, unscrew and take off connector (5) from ignition coil (6).

4. Using pliers, unscrew and take off connector (7) from fuel pump (8). Take

off wiring harness (9).

END OF TASK