|
|
TM 9-2320-211-20-3-1
Shock absorbers:
Make
Deko Products Div.
Model
750-T
Manufacturer's number... . . . . . . . . . . . . . . . . . . . DP-5516454
Type
Nonadjustable,
doubleacting.
Location
Front only
(12) Cab.
Capacity
three-man
ToP
tarpaulin
Windshield
two-piece
a. General. Refer to TM 9-2320-211-10-1 for operating instructions, break-in
operating precautions, and breakin speeds. When needed, the truck operator will
help organizational maintenance personnel when doing these services.
b. Inspecting and Servicing the Equipment.
(1) General procedures.
WARNING
Dry cleaning solvent is flammable. Do not use
near an open flame. Keep a fire extinguisher
nearby when solvent is used. Use only in well-
ventilated places. Failure to do this may result
in injury to personnel and damage to equipment.
(a) If any outside surfaces are coated with rust-preventive compound,
remove it with dry cleaning solvent.
(b) Read DD Form 1397 (Processing and Reprocessing Record for
Shipment, Storage, and Issue of Vehicles and Spare Engines), and follow all items
checked on it. This tag should be tied to the steering wheel, shifting levers, or
ignition switch.
(c) On processed materiel, when the engine has been stored for over
30 days, service the engine as given in TB ORD 392 by doing the following:
(1) Take out the injectors from each cylinder.
(2) Atomize spray 2 ounces of lubricating oil, (Military symbol PL
Special) into each cylinder through the injector opening.
(3) After an interval of 15 minutes, turn the engine by hand or
starter for about 30 seconds and put back the injectors.
1-11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |