Replacement. - TM-9-2320-211-10-40037

TM 9-2320-211-10-4

Replacement.

FRAME

Check that truck is jacked up at wheel to be replaced.

CAUTION

Do not slide wheel assembly on threaded studs. Sliding

wheel assembly may damage threads.

Lift wheel assembly (1) up and onto wheel studs (2).

NOTE

Nuts have left-hand threads on left wheel assembly and

right-hand threads on right wheel assembly. Stud and

nuts are stamped (L) left and (R) right.

Screw on and hand tighten nuts (3) on wheel studs (2).

Using square end of wheel stud nut wrench (4), tighten nuts (3) in order

shown. As soon as you can, take truck to organizational maintenance and

have wheel stud nuts torqued to 450 to 500 pound-feet.

Put on outer rear wheel and jack down truck. Refer to para 2-7.