FRAME 2 - TM-9-2320-211-10-40025

TM 92320-21110-4

FRAME

WARNING

Wear safety glasses or goggles when checking

batteries. Always check electrolyte level with

engine stopped. Do not smoke or use exposed

flame when checking battery; explosive gases are

present and severe injury to personnel can result.

Remove all jewelry such as rings, dog tags, bracelets,

etc. If jewelry contacts battery terminal, a direct

short will result in instant heating of tools, causing

damage to equipment and injury to personnel.

Unscrew and take off 12 battery filler caps (1).

2. Check the electrolyte level in each cell. Electrolyte level should be to the level/split ring in the

battery filler opening. If fluid is low, fill with distilled water to the level ring. If fluid is boil-

ing, notify next higher maintenance.

3 . Screw on and tighten 12 battery filler caps (1).

Check tightness of cables (2) to clamps (3) and clamps (2) to terminal posts (4). Tighten con-

nections if needed.

GO TO FRAME 3

Change 1 213