Section V. WINCH EQUIPMENT ITEMS MAINTENANCE

TM 9-2320-209-10-4

WINCH EQUIPMENT ITEMS MAINTENANCE

2-10. FRONT WINCH SHEAR PIN REMOVAL AND REPLACEMENT.

l/4-inch drift punch

TOOLS:

Ballpeen hammer, light

Pliers

SUPPLIES:

Artillery and automotive grease, type GAA, MIL-G-10924

Cotter pin (2)

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

Removal.

FRAME 1

Working under front left side of truck, find universal joint (1).

Turn universal joint (1) on winch drive shaft (2) until shear pin (3) can be

seen.

3. Using pliers, take out two cotter pins (4), one on each end of shear pin (3).

GO TO FRAME 2