Replacement. - TM-9-2320-209-10-40037

TM 9-232O-2O9-1O-4

c. Replacement.

FRAME 1

CAUTION

Do not slide wheel assembly on threaded studs. Sliding

wheel assembly may damage threads.

Lift wheel assembly (1) up and onto wheel studs (2). On front wheel, make

sure that one of the ventilating holes lines up with brake inspection

plate (3).

NOTE

Threads of rear dual tires should be matched as closely

as possible. Valves on rear tires must be opposite each

other (180 apart). Ventilation holes in outer wheel

should be directly alined with ventilation holes in inner

wheel.

CAUTION

When puting on wheel nuts be sure to put the curved

(ball seat ) surface of the nuts toward wheel.

NOTE

Nuts have left-hand threads on left wheel assembly and

right-hand threads on right wheel assembly. Studs and

nuts are stamped (L) left and (R) right.

Screw on and hand tighten six nuts (4) on wheel studs (2).

GO TO FRAME 2