Remove - TM-5-5420-279-230894

TM 5-5420-279-23

Remove

(1)

De-pressurize hydraulic system. Refer to unit maintenance procedure 5-118.

(2)

Note the position of and remove the hydraulic pipes connected to the stabilizer cylinder (1).

(3)

Remove the snap rings (5 and 7) and remove pin (6) securing stabilizer cylinder (1) to

stabilizer extension (8).

(4)

Remove nut (3), bolt (4) and pin (2).

(5)

Remove stabilizer cylinder (1).

(6)

Check all threaded components for wear and damage.

(7)

Check hydraulic hoses for damage.

(8)

Check Pins (2 and 6) for wear and damage.

Install

(1)

Fit the piston of the stabilizer cylinder (1) to the stabilizer extension (8) with pin (6) and

snap rings (5 and 7).

(2)

Fit the body of the stabilizer cylinder (1) to the stabilizer extension (8) with pin (2), bolt (4)

and nut (3).

(3)

Connect the hydraulic hoses to the stabilizer cylinder (1) at the positions noted during

removal.