 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-5420-279-23
a.
Remove
(1)
Disconnect the launcher from the vehicle. See operator's manual TM 5-5420-279-10.
(2)
Remove the launch frame. See direct support maintenance procedure 6-018.
(3)
Remove the A-Frame from section 3 of the slide frame. See direct support maintenance
procedure 6-006.
(4)
Remove the stop pads (10) from section 3. See unit maintenance procedure 5-081.
(5)
Remove the rotate cylinders. See unit maintenance procedure 5-078.
(6)
Disconnect the hydraulic pipes, electrical harnesses and energy chain connecting section 3
to the vehicle.
(7)
Support the weight of section three with suitable supports (4 and 12).
(8)
Remove section 1 of the slide frame (6, 7 and 8). See maintenance procedure 6-032.
(9)
Remove section 2 of the slide frame (5 and 9). See direct support maintenance procedure
6-033.
(10)
Remove the articulator cross beam (3). See direct support maintenance procedure 6-035.
(11)
Remove the rotate cylinder cross beam (2). See direct support maintenance procedure
6-036.
(12)
Remove the ISO twist lock brackets (13).
(13)
Check the component parts of section three (1 and 11).
(14)
Replace parts as required.
b.
Install
(1)
Fit the ISO twist lock brackets (13) to the slide frame section 3 (1 and 11).
(2)
Fit the rotate cylinder cross beam (2). See direct support maintenance procedure 6-036.
(3)
Fit the articulator cross beam (3). See direct support maintenance procedure 6-035.
(4)
Fit section 2 of the slide frame (5 and 9) to slide frame section 3. See direct support
maintenance procedure 6-033.
(5)
Fit section 1 of the slide frame (6, 7 and 8) to slide frame section 2. See direct support
maintenance procedure 6-032.
(6)
Fit the stop pads (10) to section 3. See unit maintenance procedure 5-081.
(7)
Connect the hydraulic pipes, electrical harnesses and energy chain.
(8)
Fit the rotate cylinders. See unit maintenance procedure 5-077.
(9)
Fit the A-Frame to the slide frame section 3. See direct support maintenance procedure
6-006.
(10)
Fit the launch frame see direct support maintenance procedure 6-018.
(11)
Connect launcher to launch vehicle. See operator's manual TM 5-5420-279-10.
(12)
Remove supports (4 and 12).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals