Remove - TM-5-5420-279-230810

TM 5-5420-279-23

Remove

(1)

De-pressurize the hydraulic system. Refer to unit maintenance procedure 5-118.

(2)

Remove the left-hand launch frame guard to gain access to the articulator manifold

assembly.

(3)

Note the position of and disconnect the hydraulic pipe work connected to the articulator

manifold assembly (1).

(4)

Note the position of and remove the electrical connections (2) on the articulator manifold

(5)

Support the weight of the articulator manifold assembly (1).

(6)

Remove the four mounting bolts, nuts and washers (3) securing the articulator manifold

assembly to the launch frame.

(7)

Remove the articulator manifold assembly (1).

(8)

Note the position of and remove all hydraulic valves, valve blocks, test points, blanking

plugs and blanking flanges.

(9)

Fit the hydraulic valves, valve blocks, test points, blanking plugs and blanking flanges to

the new manifold assembly using new gaskets and o-rings where applicable.