TAIL LIFT - PENDANT CONTROL SWITCH

TM 5-5420-279-23

5 - 157 TAIL LIFT - PENDANT CONTROL SWITCH

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Heat gun

Materials Required

Heat shrink (Qty as required)

Equipment Conditions

Tail lift pendant disconnected from the vehicle

Remove

(1)

Remove the 6 screws and washers securing the tail lift pendant cover to the tail lift pendant

body (1). See unit maintenance procedure 5-155.

(2)

Locate the control switch (5) to be removed.

(3)

Note the positions of the six cables (2) soldered to the control switch (5).

(4)

Remove the heat shrink protective sleeve and de-solder the six cables (2) and remove

them from the switch (5).

(5)

Remove the two lock screws (3) from the lock nut (4).