TAIL LIFT - ELECTRICAL HARNESS

TM 5-5420-279-23

5 - 151 TAIL LIFT - ELECTRICAL HARNESS

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

Cable ties (As required)

Equipment Conditions

Tail Lift deployed

Vehicle switched off and battery shutoff switch in the off position

NOTE

There are eight electrical harnesses fitted to the Tail Lift. Each harness can be identified

by an attached identification tag. Table 1 identifies the cable and describes its function.

Each cable is connected from the Tail Lift junction box to a solenoid valve.

Table 1

Harness From Tail Lift Junction

Identification Tag

Box To:

Number

Swing Valve Left Hand - SV31

G424/5208/1

Swing Valve Right Hand - SV32

G424/5208/2

Tilt Valve Left Hand - SV35

G424/5208/3

Tilt Valve Right Hand - SV36

G424/5208/4

Lift Valve Left Hand - SV33

G424/5208/5

Lift Valve Right Hand - SV34

G424/5208/6

Raise Valve - SV30B

G424/5208/7

Lower Valve - SV30A

G424/5208/8