 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-5420-279-23
a.
Remove
(1)
De-pressurize the system. Refer to unit maintenance procedure 5-118.
(2)
Locate the winch pilot valve (2) to be replaced on the winch motor block (4).
(3)
Remove the hydraulic pipe (3) connected to the winch pilot valve (2).
(4)
Unscrew the winch pilot valve (2) and seal.
NOTE
Unscrew the winch pilot valve (2) using a wrench on the flats closest to the winch motor
block (4).
b.
Install
(1)
Fit a new seal to the winch pilot valve (2).
(2)
Fit the winch pilot valve (2) to the winch motor block (4).
(3)
Fit the hydraulic pipe (3) to the winch pilot valve (2).
c.
Follow on task
(1)
Check the operation the winch and check for leaks.
NOTE
The winch pilot valve should be supplied pre-set, however, the operator's maintenance in
TM 5-5420-279-10 details the procedure for adjusting the winch pilot valve if required.
5-407
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals