HYDRAULIC SYSTEM - ARTICULATOR MANIFOLD VALVES

TM 5-5420-279-23

5 - 131 HYDRAULIC SYSTEM - ARTICULATOR MANIFOLD VALVES

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

Seal (As required)

Equipment Conditions

A-Frame deployed and launch frame guards removed; see operator's manual

TM 5420-2789-10

WARNING

INJURY FROM EXTREME HYDRAULIC OIL PRESSURE. THE SYSTEM MUST BE

DE-PRESSURIZED BEFORE CARRYING OUT ANY WORK THE HYDRAULIC

SYSTEM.

SLIP AND FALL INJURY. PERSONNEL MAY SLIP ON SPILLED HYDRAULIC FLUID.

SUITABLE CONTAINERS AND FLUID ABSORBENT MATERIALS ARE TO BE USED

TO CONTAIN SPILLAGE.

NOTE

This procedure is applicable for removing and installing the 20 PSI (2000kPa) pressure

reducing valve (2), 725 PSI (5000 kPa) pressure relief valve (3), synchronizing flow divider

(4) and pressure relief valve (5) on the articulator manifold.