Service - TM-5-5420-279-230508

TM 5-5420-279-23

Service

NOTE

There are three sight glasses on the reservoir for checking the hydraulic fluid level.

(1)

Remove the reservoir filler cap (1).

(2)

Using a suction pump, remove the hydraulic oil in the reservoir (2).

(3)

Connect a pump to the hydraulic connection point (5).

(4)

Pump hydraulic fluid into the reservoir (2) until the relevant section of the reservoir is half

full.

(5)

Remove the pump and connect to the hydraulic connection point (3).

(6)

Pump hydraulic fluid into the reservoir (2) until the relevant section of the reservoir is full.

(7)

Remove the pump and connect to the hydraulic connection point (4).

(8)

Repeat step 3.

(9)

Remove the pump and connect to the hydraulic connection point (6).

5-252