 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-5420-279-23
a.
Remove
(1)
Disconnect the upper winch rope (18) at
the termination point on the far bank
carriage.
(2)
Remove the spring pin (12) from the
rope guide pin (13).
(3)
Remove the rope guide pin (13).
(4)
Remove the screws (9) and washers (8)
from the space bar (7).
(5)
Remove the space bar (7).
(6)
Remove the screws (4) and washers (3)
from the pulley pin (15).
(7)
Support the weight of the pulley (5) and
remove the pulley pin (15).
(8)
Remove the pulley (5) from the forward
launch beam (11).
(9)
Remove the rope guide plates (6, 10).
(10)
Note the position of and remove the
sealing caps (1, 17), spacer (2) and
bearing (16).
(11)
Check all components for wear and
damage.
(12)
Replace components as necessary.
b.
Install
(1)
Fit bearing (16) to the pulley (5).
(2)
Fit spacer (2) and sealing caps (1, 17).
5-209
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals