Align

TM 5-5420-279-23

Align

(1)

De-pressurize hydraulic system. Refer to unit maintenance procedure 5-118.

(2)

Disconnect the Hydraulic pipes fitted to the Winch Drum Motor (2).

(3)

Undo the ring of Socket Head Screws (1) securing the Winch Drum Motor (2) to the Winch

Drum (3).

CAUTION

Do not remove the socket head screws. The socket head screws only need to be

undone by 3mm. This will release the brake to the winch drum motor.

(4)

The Winch Drum (3), may now be turned by hand by pulling on the winch rope.

(5)

Ensure that the Winch Motor Seals have not been displaced.

(6)

Tighten the Winch Motor Socket Head Screws (1).

(7)

Re-connect the hydraulic pipes to the winch motor.

(8)

When power is restored check the operation of the Winch and check for leaks.

5-178