LAUNCH FRAME - SIDE ROLLER ASSEMBLY

TM 5-5420-279-23

5 - 043 LAUNCH FRAME - SIDE ROLLER ASSEMBLY

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Rubber hammer (Common No 1)

Two point arrester harness (BII)

Materials Required

Thread locking compound, loctite 243

Nyloc nut (Qty 1)

Equipment Conditions

A-Frame deployed

WARNING

FALL INJURY WHEN WORKING AT HEIGHT. THE FALL ARREST (SAFETY)

HARNESS MUST BE USED BY PERSONNEL CARRYING OUT A SIDE ROLLER

ASSEMBLY REPLACEMENT. THE FALL ARREST (SAFETY) HARNESS IS TO BE

ATTACHED TO A SUITABLE POINT ON THE LAUNCH FRAME.