LAUNCH FRAME - CENTER PIVOT BUSHINGS

TM 5-5420-279-23

5 - 032 LAUNCH FRAME - CENTER PIVOT BUSHINGS

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Tool Kit, Common No 1

Materials Required

Thread locking compound, loctite 243

Grease (As required)

Nyloc nuts (Qty 16)

Bearing strip (Qty 4)

Equipment Conditions

A-Frame deployed

NOTE

The A-Frame Center Pivot has a split bushing arrangement. The bushings are not bonded

to the A-Frame assembly or the lower clamp.

5-136