 |
|||
|
|
|||
|
Page Title:
Chapter 4. SHIPMENT AND LIMITED STORAGE AND DEMOLITION TO PREVENT ENEMY USE |
|
||
| ||||||||||
|
|
 TM 11-6625-601-12
CHAPTER 4
SHIPMENT AND LIMITED STORAGE AND DEMOLITION
TO PREVENT ENEMY USE
Section I. SHIPMENT AND LIMITED STORAGE
es permit. The information concerning the
4-1. Disassembly of Equipment
original packaging (para 2-1) will also be help-
Prepare the MK-733/ARC-54 for shipment
ful.
and storage as follows:
a. Material Requirements. The following ma-
a. Disconnect the cables.
terials are required for packaging the MK-
b. Roil up the cables, and place them in the
For
733/ARC-54 (two sets) for shipment
cable storage space provided inside Cover,
stock numbers of materials, consult SB 38-100.
Maintenance Kit CW-711/ARC-54.
c. Place the tools in the tool kit bag provided.
d. Place Tool Kit Electronic Equipment
TK-156/ARC-54; Antenna AS-1487/ARC-54;
Extenders, Modules MX-4930/ARC-54, MX-
4931/ARC-54, MX-4932/ARC-54, MS-4933/-
ARC-54, MX-4934/ARC-54; Adapter, Connec-
tor UG-1678/U; and the technical manual in
the compartment provided.
e. Place the TS-1967/ARC-54 in the space
provided in the transit case. Fasten it in place
with the screws provided.
f. Place the cover on the lower half of the
transit case.
g. Secure the four twistlock clamps located
b. Packaging for Shipment. Refer to para-
on the sides of the transit case.
c. Packaging for Limited Storage. The transit
4-2. Repackaging for Shipment and Limited
case provides adequate protection for the oth-
Storage
er components of the MK-733/ARC-54 during
The exact procedure for repackaging depends
limited storage. The case is corrosive-resist-
on the material available and the conditions
ant and is sealed by a rubber gasket which
under which the equipment is to be shipped
makes the case interior airtight and moisture-
(b below) or stored (c below). Adapt the pro-
proof.
cedures outlined below whenever circumstanc-
Section II. DEMOLITION OF MATERIAL TO PREVENT ENEMY USE
4-4. Methods of Destruction
4-3. Authority for Demolition
The demolition procedures given in para-
The tactical situation and time available will
determine the method to be used when de-
struction of equipment is ordered. In most cas-
from using or salvaging this equipment. Dem-
es, it is preferable to demolish completely some
olition of the equipment will be accomplished
portions of the equipment rather than to par-
only upon the order of the commander.
4-1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals