Special Information - TM-11-6625-1635-24P0006

TM 11-6625-1635-24P

Application/Explanation

Code

g. Unit o f Measure (U/M). Indicates the

standard of the basic quantity of the listed item as

F-The lowest maintenance level capable of

com-

used in performing the actual maintenance func-

plete repair of the support item is the

direct

tion. This measure is expressed by a two-character

support level.

alphabetical abbreviation (e.g., ea, in, pr, etc).

D-The lowest maintenance level capable of

com-

When the unit of measure differs from the unit of

plete repair of the support item is the

depot

issue, the lowest unit of issue that will satisfy the

level.

required units of measure will be requisitioned.

Z-Nonreparable. No repair is authorized.

h. Quantity Incorporated in Unit. Indicates the

(3) Recoverability code. Recoverability codes

quantity of the item used in the breakout shown

are assigned to support items to indicate the

on the illustration figure, which is prepared for a

disposition action on unserviceable items. The

functional group, subfunctional group, or an

recoverability code is entered in the fifth position

assembly. A "V" appearing in this column in lieu

of the Uniform SMR Code format as follows:

of a quantity indicates that no specific quantity is

applicable, (e.g., shims, spacers, etc ).

Recoverability

4. Special Information

Definition

Codes

Z-Nonreparable item. When unserviceable, con-

The following publications pertain to the

demn and dispose at the level indicated in

MK-1004/ARC and its components:

position 3.

F-Reparable item. When uneconomically repar-

TM 11-5831-201-20, Control, Intercommunication

able, condemn and dispose at the direct

Set C-161lD/AIC and Discriminator, Discrete

support level.

Signal MD-736/A

D-Reparable item. When beyond lower level repair

TM-11-5831-201-20P, Control, Intercommunica-

capability, return to depot. Condemnation

tion Set C-161lD/AIC and Discriminator, Dis-

and disposal not authorized below depot

crete Signal MD-736/A

level.

c . National Stock Number. Indicates the

TM 11-5831-201-34P, Control, Intercommunica-

National stock number assigned to the item and

tion Set C-1611D/AIC and Discriminator,

will be used for requisitioning purposes.

Discrete MD-736/A

d. Part Number. Indicates the primary number

TM 11-5831-201-35, Control, Intercommunication

used by the manufacturer (individual, company,

Set C-1611D/AIC and Discriminator, Discrete

firm, corporation, or Government activity), which

Signal MD-736/A

controls the design and characteristics of the item

by means of its engineering drawings, specifica-

TM 11-6625-1635-12, Maintenance Kit, Electronic

tions, standards, and inspection requirements to

Equipment MK-1004/ARC

identify an item or range of items.

TM 11-6625-1635-35, Maintenance Kit, Electronic

Equipment MK-1004/ARC

NOTE

When a stock numbered item is requisi-

tioned, the repair part received may have

a different part number than the part

being replaced.

e. Federal Supply Code for Manufacturer

(FSCM). The FSCM is a 5-digit numeric code

listed in SB 708-42 which is used to identify the

manufacturer, distributor, or Government agency,

etc.

f. Description. Indicates the Federal item name

and, if required, a minimum description to identify

the item.