|
|
TM 1-1510-223-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
LOW SPEED SYSTEMS CHECK (CONT)
d. Power- IDLE.
e. Trim aircraft to trim speed as shown in
f. Airspeed - Reduce by one knot/ second until
aircraft stalls.
*g. Airspeed (at warning and at stall) - Record
(KIAS).
h. Roll must be controllable within 15 degrees
left or right.
*
7.
Stall speed, stall warning, and stall
characteristics (gear down and flaps full down,
power on) - Check as follows:
a.
Flaps - APPROACH (40%), below 197
KIAS.
b. Gear - DN, below 179 KIAS.
c. Flaps - DOWN (100%), below 151 KIAS.
d. PROP levers - Set 1700 RPM.
f. Trim aircraft to trim speed as shown in figure
g. Airspeed - Reduce by one knot/second until
aircraft stalls.
*h. Airspeed (at warning and at stall)- Record
(KIAS).
i. Roll must be controllable within 15 degrees
left or right.
8. Flaps - UP.
9. Gear- UP.
2-66
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |