DA Label 163 for special calibration

TB 750-25

NOTE

An instrument requiring repair will continue to receive a

cyclic limited calibration until repair is accomplished if it has

functions that are operable. Ensure that repaired TMDE is

calibrated after repairs are accomplished.

The parts

required to accomplish repair will be requisitioned and the

requisition/ document number or work order number entered

along the bottom line of blocks 7a and 7b before the item is

returned to the owner/user.

(d) Block 8 - Authentication. The supervisor/commander (or designated

alternate) of the instrument owner signs this block indicating the instrument limitations

are known.

(2) DA Label 163 for special calibration (fig C-3). When an instrument is

calibrated to more stringent specifications other than those listed in the approved

calibration procedure, to a specific value(s), or IAW a locally developed procedure,

entries will be as follows:

(a) Block 7 - Line out (obliterate) the words "Limited Use - Do Not Use." Do

not line out (obliterate) the words "Special Calibration - Corrections Are."

(b) Block 7a - Parameter/Value. Enter the parameters, ranges, or values that

were calibrated to accuracy's or tolerances other than those specified in the approved

calibration procedure.

applies to the parameters or value that was corrected. This entry must be on line with

the parameter/value.

NOTE

When all parameters, ranges, values, and uncertainties

cannot be entered in blocks 7a and 7b, a correction chart or

test report must be provided. The number of the test report

must be entered in block 4 and the words "See Report" must

be entered in blocks 7a and 7b.

(d) Block 8 - Authentication. The immediate supervisor (or a designated

alternate) of the technician performing a calibration will sign his/her name in this block,

attesting that the data entered thereon is an accurate statement of the calibration

results, and the item is released for use. This label will not be affixed to the instrument

without an authenticating signature.

C-4