Section V. DISPOSITION INSTRUCTIONS

TB 43-0002-34

Section IV. COMPUTATION OF REPAIR COST ESTIMATES

8. Procedures. The total estimated cost of repairs will include direct and in-

7. Cost Factors. Refer to paragraphs 4-19 through 4-29 of AR 750-1, for ex-

planation of cost factors to be considered when computing repair cost esti-

direct labor costs, direct material costs, and other charges that are applicable

to the repair of the Item. Results of the technical inspections, recorded on DA

Form 2404, are transferred to Section II, DA Form 2407.

Section V. DISPOSITION INSTRUCTIONS

c. Report of unserviceable excess stock on SF 359 (Billing Adjustment/

9. Eligibility of Material for Evacuation to Depot Maintenance. All equip-

Allowance Card) will be accompanied by inspection, or report on DA Form

ment covered by this bulletin is eligible for evacuation to depot whenever the

3590 in three copies.

technical inspection performed at general support level Indicates that repairs

d Request for disposition instructions will be prepared in accordance with

required are not authorized and/or exceed their capability or maintenance ex-

AR 755-1. Attention IS called to reporting requirements for both CONUS

penditure limits listed herein.

and oversea installations in AR 755-1, for all principal items of equipment.

10. Disposition Instructions.

e. Equipment will not be reported for disposition solely on the basis that it

IS overage. Serviceable overage equipment will be retained in use, unless

a. Field Commanders are authorized to waive repair expenditure limits

priority of organization's mission warrants a replacement. Repairs to over-

under the conditions and within the limits established in AR 750-1

age equipment will be limited to the maintenance necessary to maintain it

in a safe, operable condition.

b. When the estimated one-time repair cost exceeds the prescribed ex-

penditure limits and waiver of limits IS not authorized as provided for by

paragraph 4-12, AR 750-1, no action will be taken to dispose of the equip-

ment until disposition instructions are received from the NICP.

Section VI. APPENDIXES

11. General. Appendixes A, B, and C contain equipment listings and data for

e. Column 5. Serial Number Range or USA Number. The serial number

determining repair eligibility. The equipment listings contain only those end

ranges for the production years listed in column 4.

items that are known to be in hands of troops or depot stock. All items are

f. Column 6. Years of Life Expectancy. FSC Class 5430-Appendix C, rigid

identified by National Stock Number and are arranged in numerical sequence.

type metallic tanks normally are issued as Class IV items and therefore the

These listings are not to be used as an identification list of all items assigned

life expectancy is indefinite. The life expectancy for collapse type tanks

to the FSC classes indicated. For complete identification of FSC Group 54 ma-

is as shown.

terial, refer to the appropriate supply catalogs (II).

12. Explanation of Columns. The explanation of columns of Appendixes A,

B, and C are as follows:

a Column 1. FSC or Stock Number. End item National Stock Number

listed in numerical sequence.

13. References.

b. Column 2. Item Identification. Item generic nomenclature, functional ca-

pability, make and model.

c. Column 3. Serial or USA Number Identification and Remarks. This col-