5-38. GENERATOR ASSEMBLY.
E n g i n e s LD-465-1C and LDT-465-1C.
Some engines have one or more shims (3) between
g e n e r a t o r (1) and mounting bracket (2). If shims (3)
w e r e taken out during removal, they must be put back.
P u t generator (1) in place on mounting bracket (2). Hold it until
s o l d i e r B puts in mounting bolts.
I f shims (3) were used, put in correct number of shims. Put in
t w o bolts (4) with two washers (5). Put on two more washers and
two nuts (6).
S o m e engines use cotter pins (7).
I f cotter pins (7) were used, put in two cotter pins.
GO TO FRAME 2