P l u g s and tags put on during removal must be taken
off during replacement.
I f working on type A or B, flame heater assembly, put ignition unit (1) with
t w o c l a m p s (2) in place.
Put o n two nuts with lockwashers (3).
Put f l a m e heater cable assembly (4) in place. Tighten nuts (5 and 6).
Type C flame heater assembly may not have tube clamp (7).
Put w i r i n g harness (8) with tube clamp (7) in place. Tighten nut (9).
Put t u b e clamp (7) in place and put on nut with lockwasher (10).
GO TO FRAME 6