Put flame heater elbow (2) in place.
P u t flame heater gasket (1) in place.
On some engines, ignition coil (3) may be mounted on top
of engine instead of next to flame heater elbow as shown.
P u t ignition coil (3) with two clamps (4) in place.
P u t on four nuts with lockwashers (5).
T i g h t e n spark plug to 8 pound-
S c r e w in spark plug (6) with gasket (7).
S c r e w in nozzle and check valve assembly (8) with locknut (9). Tighten
D o not use open end wrench to put on tube adapters (10).
U s e tubing wrench or box wrench or equipment may be
P u t on two tube adapters (10).
GO TO FRAME 5