b. Engine LDS-465-2.
T a k e off four clamps (1).
C l e a n inside and outside of three tubes (2, 3, and 4) with soapy water and
d r y with clean cloth.
Dry cleaning solvent is flammable. Do not use near
a n open flame. Keep a fire extinguisher nearby when
s o l v e n t is used. Use only in well-ventilated places.
Failure to do this may result in injury to personnel
a n d damage to equipment.
Do not let dry cleaning solvent touch three tubes
( 2 , 3, and 4). Tubes will dry out, rot, and need
If dry cleaning solvent splashes on
t u b e s , dry off with clean cloth.
C l e a n four clamps (1), four screws (5), and six tube nuts (6) with dry
c l e a n i n g solvent. Use a stiff brush to take off sludge or gum deposits.
D r y with clean cloth.
END OF TASK