FRAME 2 - TM-9-2815-210-34-2-20273

9-2815-210-34-2-2

FRAME 2

P u t spring retainer (1) over outer valve spring (2) as shown. Using valve

s p r i n g compressor, squeeze spring retainer against springs so that groove

( 3 ) in valve stem (4) sticks through hole in spring retainer.

P u t two spring retainer locks (5) over groove (3) in valve stem (4) and hold

retainer locks together.

W h i l e holding retainer locks (5) together, slowly work valve spring

c o m p r e s s o r to let all tension off valve springs (2).

CAUTION

Be sure spring pressure is holding retainer locks (5)

i n place in groove on valve stem before letting go of

r e t a i n e r locks. I f retainer locks are not locked to

v a l v e stem, assembly may fly apart when retainer

locks are let go and parts will be lost.

L e t go of retainer locks (5).

Take off valve spring compressor.

Do frames 1 and 2 again for other two exhaust valves and for three intake

valves.

END OF TASK

4-253