CAB CLEARANCE MARKER LIGHTS CABLE ASSEMBLY REPLACEMENT

TM 9-2320-366-20-3

7-66. CAB CLEARANCE MARKER LIGHTS CABLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Batteries disconnected (para 7-57).

Lockwire (Item 30, Appendix D)

PDP cover removed (para 16-2).

Lockwasher (10) (Item 82, Appendix G)

Lockwasher (2) (Item 88, Appendix G)

Gasket (5) (Item 24, Appendix G)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

a. Removal.

(1) Remove three screws (1) and washers (2) from PDP (3).

(2) Remove three screws (4) from PDP (3).

(3) Lift PDP (3) outward to gain access.

(4) Remove two nuts (5), lockwashers (6), washers (7), and

cover (8) from terminal board TB1 (9).

Discard

(5) Disconnect terminal lug TL74 (10) from terminal board

TB1 (9) position 3.

(6) Disconnect terminal lug TL86 (11) from terminal board

TB2 (12) position 4.

Change 1