START INHIBIT PUSHBUTTON SWITCH REPLACEMENT

TM 9-2320-366-20-3

7-19. START INHIBIT PUSHBUTTON SWITCH REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Batteries disconnected (para 7-57).

Dispenser, Pressure Sensitive Adhesive Tape

PDP cover removed (para 16-2).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

a. Removal.

(1) Remove three screws (1) and washers (2) from PDP (3).

(2) Remove three screws (4) from PDP (3).

(3) Lift PDP (3) outward to gain access.

NOTE

Tag electrical connectors and connection

points prior to disconnecting.

(4) Disconnect terminal lugs TL158 (5) and TL159 (6) from

start inhibit pushbutton switch (7).

(5) Remove spring clip (8) and start inhibit pushbutton

switch (7) from PDP (3).