Installation. (cont) - TM-9-2320-366-20-30702

TM 9-2320-366-20-3

6-8. PERSONNEL HEATER HOSES REPLACEMENT (CONT)

(11) Lower cab (TM 9-2320-366-10-1).

NOTE

Heater outlet hose is marked with an

arrow pointing down.

(12) Position heater outlet hose (6) on return fitting (10).

NOTE

Heater inlet hose is marked with an arrow

pointing up.

(13) Position heater inlet hose (7) on supply fitting (11).

(14) Engage as many clamp tabs (4) as possible in tab

windows (5) allowing little or no play between

clamps (2) and heater outlet hose (6) and heater

inlet hose (7).

(15) Tighten two clamps (2) to 8-9 lb-in. (1 Nm).

(16) Raise cab (TM 9-2320-366-10-1).

NOTE

Minimum allowable gap on clamp is 0.1 in.

(0.3 cm). If gap is less than 0.1 in. (0.3

cm), remove and re-install clamp

(17) Measure gap on two clamps (2).

Change 2