Ether Valve Removal.

TM 9-2320-366-20-3

4-15. ETHER STARTING AID REPLACEMENT (CONT)

e. Ether Valve Removal.

(1) Disconnect ether tube (1) from ether valve (2).

(2) Disconnect ether valve electrical connector (3) from

connector J93 (4).

(3) Remove two self-locking nuts (5), screws (6), washers

(7), terminal lug TL84 (8), and ether valve (2) from spare

tire retainer (9). Discard self-locking nuts.

f. Ether Valve Installation.

(1) Position ether valve (1) on spare tire retainer (2),

terminal lug TL84 (3), two washers (4), screws (5), and

self-locking nuts (6).

(2) Tighten self-locking nuts (6) to 25-31 lb-ft (34-42 Nm).

(3) Connect ether valve electrical connector (7) to connector

J93 (8).

(4) Connect ether tube (9) to ether valve (1).

g. Follow-On Maintenance.

(1) Raise spare tire (TM 9-2320-366-10-2).

(2) Connect batteries (para 7-57).

(3) Operate ether starting aid (TM 9-2320-366-10-2) and

check for ether leaks.

End of Task.

4-84

Change 1