Installation. - TM-9-2320-279-20-11067

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

b. Installation.

NOTE

INTER-AXLE DIFF. LOCK and 8X8 DRIVE indicator lights are installed the same

way. INTER-AXLE DIFF. LOCK indicator light is shown.

(1) Crimp ring terminal (13) on wire (10) of TRACTION CONTROL indicator light (5).

(2) Connect ring terminal (13) with screw (8) and lockwasher (9) to TRACTION CONTROL

switch (11).

(3) Connect wire (12) of TRACTION CONTROL indicator light (5) to ground wire (12).

(4) Insert two TRACTION CONTROL indicator lights (5) through mounting hole in panel (7).

(5) Install two nuts (4) and washers (6).

(6) Install two force rings (3) in lenses (2). Install lenses into light shields (1). Install light shields.

c. Follow-on Maintenance.

(1) Install instrument panel (para 7-19).

(2) Check operation of TRACTION CONTROL indicator light assembly (TM 9-2320-279-10).

END OF TASK

7-363