 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-19.
INSTRUMENT PANEL REMOVAL/INSTALLATION (CONT).
a.
Removal.
(1)
Remove six screws (1) and sunshield (1.1) from instrument panel (2).
(2)
Lift instrument panel (2) to reach plug (3).
(3)
Disconnect cable connector (3) at rear of instrument panel (2).
NOTE
Tag and mark air lines before disconnecting.
(4)
Disconnect two air lines (4) from air pressure gage (5).
(5)
Remove instrument panel (2).
b.
Installation.
(1)
Place instrument panel (2) inside cab.
(2)
Connect two air lines (4) to air pressure gage (5).
(3)
Connect cable connector (3) to instrument panel (2).
(4)
Position instrument panel (2) and install sunshield (1.1) and six screws (1).
c.
Follow - on Maintenance.
(1)
Connect batteries (para 7-91).
(2)
Start engine and check operation of instrument panel gages, lights, and warning system
indicators (TM 9-2320-279-10).
(3)
Shut off engine (TM 9-2320-279-10).
END OF TASK
Change 5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals