Installation. - TM-9-2320-279-20-10660

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-5. VOLTAGE REGULATOR REMOVAL/INSTALLATION (CONT).

NOTE

There are three models of alternator that

may be installed on the vehicle.

Model A is a 65 amp alternator.

Model B is a 100 amp

alternator.

Model C is a 130 amp

alternator. Repair of

Model C is done at Direct

Support.

Removal.

(1) Remove nut (1) and lockwasher (2)

to disconnect wire (3) from voltage

regulator (4).

(2) Remove four screws (5) and

voltage regulator (4) from

alternator (6).

Installation.

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give

off harmful vapors, and are harmful to

skin and clothing. To avoid injury or

death, keep away from open fire and

use in well-ventilated area. If adhesive,

solvent, or sealing compound gets on skin

or clothing, wash immediately with soap

and water.

NOTE

Apply electrical sealant to exposed wire

connectors after installing connectors.

(1)

Position voltage regulator (4) on

alternator (6) and attach with four

screws (5).

(2) Attach wire (3) with lockwasher (2)

and nut (1).

Follow-on Maintenance.

(1) Connect batteries (para 7-91).

(2) Test alternator (para 7-2).

(3) Install engine side panel

(TM 9-2320-279-10).

(4) Close engine cover

(TM 9-2320-279-10).

END OF TASK

7-10

Change 5